EXPLORE MORE CATEGORIES
- Home
- ยป
- Products & Services
- »
- Waterproofing Chemical
Waterproofing Chemical
Offering you a complete choice of products which include proofex torchseal 3pl, dr fixit 101 pidiproof lw plus, dr fixit 652 roofseal classic waterproofing solution, dr fixit 104 dampguard classic waterproofing chemical, dr fixit 654 roof seal ultra next waterproofing chemical and 20l dr fixit 100 pidiproof lw plus super.
Proofex Torchseal 3PL
Product Price: Rs 170 / Square MeterGet Best Price
Product Brochure
Product Details:
| Material | HDPE |
| Thickness | 3mm |
| Usage/Application | Waterproofing |
| Type | 3mm Plain Finish Torch applied waterproofing membranes |
| Color | Black |
| Brand | Fosroc |
| Packaging Type | Roll |
| Size | 10 m long x 1m wide roll |
| Penetration at 25 DegreeC | 25 dmm |
| Elongation | 45 |
| Reinforcement base | 160 GSM- Polyester |
- 3mm Plain Finish Torch applied waterproofi ng
- membranes.
- Uses
- To provide waterproofi ng and damp-proof membranes for:
- Concrete roof and fl oor slabs
- Shallow Basement tankings
- Car park deck slabs
- Concrete retaining structures
- Tunnels and subways
- Advantages
- High strength reinforcement gives excellent resistance to
- puncture and stress
- Easily torch applied
- Readily formed to contours
- Description
- Proofex Torchseal 3PI are quality torch applied APP based
- plain membranes manufactured from premium grade heavily
- modifi ed bitumen, reinforced with a core of non-woven polyester
- fabric.
- The core gives the membrane its excellent mechanical properties,
- allows for good elongation and aff ords high resistance
- to piercing.
- Proofex Torchseal 3PI membranes are ideal for use in a wide
- range of waterproofi ng applications such as shallow foundations,
- basements, tunnels, roofs, carpark decks and other civil
- works. The chemical resistance of Proofex Torchseal 3PI makes
- it particularly suitable for tanking applications in areas where
- aggresive ground water conditions prevail.
- Specifi cation
- The waterproofi ng membrane shall be Proofex Torchseal 3PI
- a high performance APP based torch applied 3mm thick plain
- membrane, manufactured from high quality polymer - modifi
- ed bituminous compounds and reinforced with non woven
- polyster fabric.
- Technical support
- Fosroc off ers a comprehensive technical support service to
- specifi ers, end users and contractors. It is also able to off er
- on-site technical assistance, an AutoCAD facility and dedicated
- specifi cation assistance in locations all over the world.
Yes! I am InterestedRequest A Callback
Dr Fixit 101 Pidiproof LW Plus
Product Price: Rs 260 / LitreGet Best Price
Minimum Order Quantity: 20 Litre
Product Brochure
Product Details:
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Category | Integral Waterproofing |
| Color | Red |
| Usage/Application | Waterproofing |
| Packaging Size | 5 L |
| Ph Value | 14 % |
| Shelf Life | 2 Years From The Date Manufacture When In Sealed Pack And Stored Under Proper Condition |
| Packaging Type | Bottle |
| Sp. gr. @ 250C | 1.09 |
| Chloride content | 0.03% |
| Water permeability | Passes |
| Dosage | 200 Ml Per 50 Kg Bag Of Cement |
| Appearance | Free flowing liquid |
| Non Volatile Content | 14.5 % |
| Product Code | 101 |
- Waterproofs concrete during the construction stage.
- Improves workability.
- Avoids cracking.
- Protect concrete from corrosion.
- LW+ should be used in concrete, plaster and mortar in all the areas of house.
- Mix 200 ml of LW+ with every 50 kg bag of cement.
Yes! I am InterestedRequest A Callback
Dr Fixit 652 Roofseal Classic Waterproofing Solution
Product Price: Rs 4,700 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Coverage | 0.75 ltrs/ m2/coat |
| Type | Cold Applied Elastomeric Waterproofing Coating |
| Color | White |
| Usage/Application | Waterproofing |
| Packaging Size | 20 L |
| Purity | 100% |
| Specific Gravity | 110 |
| Packaging Type | Bucket |
| Brush ability | No Sag, Slip & Run Off |
| Solid content, % | 65 |
| Crack Bridging | No Crack At 2mm Gap |
| Film thickness | 750 Micron In Two Coats |
| Elongation at break % | 500 |
| Product Code | 652 |
- Unique, heat reflecting roof waterproof coating
- 7 Years waterproofing warranty
- PU Acrylic hybrid emulsion technology
- Reinforced with nano fibres
- Tough durable elastic membrane with > 200% elongation
- Surface temperature reduction upto 10ºC
- High material and labor saving
- Unique, heat reflecting roof waterproof coating
- 7 Years waterproofing warranty
- PU Acrylic hybrid emulsion technology
- Reinforced with nano fibres
- Tough durable elastic membrane with > 200% elongation
- Surface temperature reduction upto 10ºC
- High material and labor saving
Yes! I am InterestedRequest A Callback
Dr Fixit 104 Dampguard Classic Waterproofing Chemical
Product Price: Rs 380 / KgGet Best Price
Minimum Order Quantity: 20 Kg
Product Brochure
Product Details:
| Form of Chemical | Solvent |
| Usage/Application | For RCC Water Tanks |
| Category | Waterproofing Coating |
| Coverage | 8m2 Per Kg Per Coat At DFT 75microns |
| Type | Damp Proofing Coating |
| Packaging Size | 1 Kg |
| Packaging Type | Box |
| Brand | Dr Fixit |
| Shelf Life | 12 Months |
| Pot Life | 40 Min |
| Surface Drying Time | 5 Hrs |
| Adhesion Strength | 2.5 N/mm2 |
| Product Code | 104 |
- Description Dr. Fixit Dampguard Classic is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. It is used as an internal coating for the damproofing treatments of water tanks with anti-microbial anti fungal properties. It has excellent water resistance, adhesion to concrete surface, has good hardness and sets faster. Typical Application } Damproofing treatment for RCC water tanks. } Internal damp wall treatment. } As putty with OPC- White cement to fill the fine cracks of internal walls. } In sterile areas of pharma, food industries & hatcheries etc. Features } Application advantage - It can be applied over damp concrete & plaster surfaces and provides excellent water resistant coating with tough & hard film. } Microbial resistant - Possesses anti-fungal property and is resistant to micro-organisms. } Adhesion - Provides excellent adhesion to all cementitious substrates. } Chemical resistant - Excellent resistance to water, salt water, mild acids, alkalis & soap water. } Toxicity – It is Non-toxic. } Eco-friendly - Non-hazardous and non-flammable. } Economical - Water dilutable with high coverage hence economical. } CFTRI Certified - Safe for drinking / Potable water contact. Packaging 500 gm, 1 kg & 200 kg
Yes! I am InterestedRequest A Callback
Dr Fixit 654 Roof Seal Ultra Next Waterproofing Chemical
Product Price: Rs 7,500 / LitreGet Best Price
Minimum Order Quantity: 10 Litre
Product Brochure
Product Details:
| Form of Chemical | Emulsion |
| Usage/Application | Waterproofing |
| Packaging Size | 20 L |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Coverage | 0.75 ltrs/m2/coat |
| Color | White |
| Type | Single Component Cold Applied Elastomeric Waterproofing Coating |
| Specific Gravity | 110 |
| Packaging Type | Bucket |
| Brush ability | No sag, slip & run off |
| Solid content, % | 65 |
| Product Code | 654 |
- Polyurethane hybrid, long life waterproofing coating system
- 12 Years waterproofing warranty
- Acrylate with flutyne technology
- 1 mm film thickness
- Tough durable elastic membrane with > 300% elongation
- Surface temperature reduction upto 10ºC
- Highly foot trafficable coating
- Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin emulsion. It is a tough yet extremely flexible coating that can be efficiently applied by roller or squeegee. Typical Applications Waterproofing of flat concrete roofs. Features } Waterproofing - High film build up provides excellent water resistance. } Elastomeric - Excellent flexibility and elongation properties - can easily accommodate all normal building movements. } Seamless - Can be applied to complex shapes to form a seamless and highly durable water proofing coating. } Adhesion - Adheres firmly to most of building surfaces including concrete, brick etc. both horizontal and vertical surfaces. } Water based – Easy cleaning of tools and brushes by water. } Easy to apply - Suitable consistency for easy application by brush, roller or squeegee. Packaging 5 & 20 Ltrs
Yes! I am InterestedRequest A Callback
20L Dr Fixit 100 Pidiproof LW Plus Super
Product Price: Rs 280 / LitreGet Best Price
Minimum Order Quantity: 50 Litre
Product Brochure
Product Details:
| Packaging Size | 20 L |
| Form of Chemical | Liquid |
| Usage/Application | Improves Workability With M-Sand - Facilitates Easy Placing And Good Compaction Of Mixed Cement |
| Brand | Dr Fixit |
| Category | Waterproofing Admixture |
| Packaging Type | Bucket |
| Model | 100 Pidiproof LW+ Super |
| Product Code | 100 |
- Delays Corrosion - Makes concrete more cohesive, hence protects steel better against corrosion.
- Improves workability with M-Sand - Facilitates easy placing and good compaction of mixed cement concrete and plaster mortar/ screed specially made with M-Sand.
- Waterproof concrete & mortar - Increases durability by improving the waterproofing of concrete.
- Increase strength and durability - The setting time and compressive strength of the concrete remains within the specification limits.
- Compatibility - Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
- Shrinkage - Reduces shrinkage crack development in plaster & concrete.
Yes! I am InterestedRequest A Callback
Dr Fixit 196 Bitufix Waterproofing Chemical
Product Price: Rs 1,800 / BucketGet Best Price
Minimum Order Quantity: 20 Bucket
Product Brochure
Product Details:
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Type | Waterproofing Chemical |
| Color | Brown |
| Usage/Application | Waterproofing |
| Packaging Size | 20 L |
| Purity | 100% |
| Packaging Type | Bucket |
| Product Code | 196 |
- Description Dr. Fixit Bitufix is an emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission. Typical Applications Dr. Fixit Bitufix is used for providing damp proofing for below ground concrete structures which are above the water table. The coating is also used as a moisture vapor barrier on block works and concrete surfaces prior to cladding. This can also be used as the protective coating for built- up roofing systems along with fabric. Features } Resists the attack of salts like chlorides and sulphates that are present in the soil. } Easy to apply } Cold applied } Adheres to concrete } Can be applied in closed or confined spaces } Water-based } Non-flammable } Versatile } Economical Packaging 5 & 20 Ltr Method of Application } The application temperature should be between 5°C to 55°C. Application procedures may vary slightly depending upon site conditions. The general recommended guidelines for the application of the bitumen coating is as follows: 1 . SURFACE PREPARATION } The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil and grease. } All surface imperfections and protrusions are to be removed and repaired. Structurally unsound and friable concrete must be removed and repaired with a suitable repair mortar or PMM. 2. PRIMING } Primer is always recommended prior to coating as it not only penetrates into the concrete pores and seals the substrate. It also acts as an adhesion promoter for further coatings. The primer coat can be made in the site by diluting the same bitumen emulsion with 20% water. The primer may be applied by a brush, roller or airless spray. Allow the primer to dry before any further coats are applied. However, if the primer after application is left open for more than 24 hours after it becomes dry, clean the surface of any settled dust and apply a fresh coat of the primer. 3. APPLICATION } Stir the contents of the drum thoroughly prior to application to remove any sediment. The application can be done with a roller, brush or airless spray. Apply the coating at a coverage rate of 1-4 m2/Ltr/ coat, depending on the dry film thickness required. 2nd coat to be applied in a direction perpendicular to the 1st coat.
Yes! I am InterestedRequest A Callback
10kg Dr Fixit 301 Pidicrete Urp Waterproofing Chemical
Product Price: Rs 2,180 / LitreGet Best Price
Minimum Order Quantity: 20 Litre
Product Brochure
Product Details:
| Packaging Size | 10kg |
| Type | Sbr Latex For Waterproofing |
| Usage/Application | Waterproofing |
| Category | Waterproofing Coating |
| Coverage | 2.2 M2/kg In 2 Coats As A Waterproofing Coating |
| Color | Milky White |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Purity | 100% |
| Packaging Type | Bucket |
| Product Code | 301 |
- Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. Standard Compliance / specification Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards Typical Applications } For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc. } For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies. } As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering. } For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding. } As external rendering – Weatherproof & frost resistant render. } As bonding slurry coat for pinhole treatment on concrete surface. Features } Multipurpose – It is multipurpose & economical product, easy to use. } Cracking – It prevents cracking by improving flexural strength. } Hardness – Improves the hardness & prevents dust generation. } Shrinkage – Reduces drying & aging shrinkage cracks. } Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces. } Erosion & corrosion – Improves erosion resistance & prevents corrosion. } Abrasion resistance – Improves abrasion resistance of the cement mix. } Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding. Packaging 0.2 kg, 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg & 50 kg Method of Application 1 SURFACE PREPARATION } Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents. } Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid featheredging & to provide strong bond. } Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting. } For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. 2 WATERPROOFING COATING } For a waterproofing coating Mix URP: Cement in the ratio 1:1.5 by volume. } Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding cement to Dr. Fixit Pidicrete URP until the required consistency is achieved. SBR L ate x for waterproofing & repairs Dr. Fixit Pidicrete URP 301-16/06/16 Building Repai rs 164 301 Dr. Fixit Pidicrete URP } Brush apply 2 coats of the mix in a span of 4-6 hours on the prepared concrete substrate. } Overlay the coating with a protective screed to the desired slope & thickness. 3 BONDING PRIMER } For a bonding primer coat of Dr. Fixit Pidicrete URP mix URP: Cement in the ratio 1:1 by volume. } Brush apply 1 continuous coat of the mix on the prepared concrete substrate. } Ensure to overlay the repair mortar when the bond coat is still tacky. 4 REPAIR MORTARS & RENDERS } A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 150 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 5 FLOOR SCREEDS & PCC A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 75 kg, 6 mm downsize aggregates: 75 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 6
Yes! I am InterestedRequest A Callback
Fosroc Nitobond SBR Latex
Product Price: Rs 3,800 / LitreGet Best Price
Product Brochure
Product Details:
| Form of Chemical | Liquid |
| Packaging Size | Nitobond SBR (Latex) is supplied in 1, 5, 20 & 50 litre containers |
| Usage/Application | Waterproof Plasters for Masonary and Slurries |
| Brand | Fosroc |
| Coverage | 5 m2/ litre depending on substrate porosity. |
| Type | Latex based Mortar and screed modifi er & bonding agent |
| Color | White |
| Category | Cementitious Waterproofing |
- Latex based Mortar and screed modifi er &
- bonding agent
- Uses
- For modifying and improving bonding of fl oor toppings, renderings
- and mortars; repair of worn, damaged and spalled concrete,
- repair of large cracks; polymer modifi ed fl oor screeds;
- waterproof plasters for masonary and slurries.
- Advantages
- ๏ฎ Simple to use - Single component, gauged as required.
- ๏ฎ๏ High - Provides excellent bond to concrete, adhesion
- plaster, masonry, stone work, etc.
- ๏ฎ๏ Improves -Gives weather resistant mortar with improved
- durability impermeability to chlorides and other harmful
- agents.
- ๏ฎ๏ Reduces - Provides waterproof screeds, plasters and
- Permeability slurries.
- ๏ฎ๏ Increases - Improved tensile and fl exural properties
- strength allow thin applications.
- ๏ฎ๏ Versatile - Compatible with all common hydraulic cements.
- ๏ฎ Cost eff ective - Nitobond SBR (Latex) is economical to use
- Description
- Nitobond SBR(Latex) is modifi ed styrene butadiene emulsion
- specially designed for use as a bonding aid and gauging liquid
- for cementitious systems. It is resistant to hydrolysis and can
- therefore be used for external applications too.
- Technical Support
- Fosroc provides a technical advisory service supported by a
- team of specialists in the field.
Yes! I am InterestedRequest A Callback
Fosroc Brushbond Ti Flexicoat
Product Price: Rs 2,350 / BucketGet Best Price
Product Brochure
Product Details:
| Form of Chemical | Emulsion |
| Brand | Fosroc |
| Category | Acrylic Based Polymer Coating |
| Coverage | 3.0 m2/2coats/ Litre @ 300 microns dft after dilution. |
| Type | Water-based white coloured emulsion |
| Color | White |
| Usage/Application | Elastomeric acrylic polymer based solar reflective and insulating coating |
| Shelf Life | Brushbond TI Flexicoat system has a shelf life of 6 months in unopened packs, if kept in a cool dry |
| Appearance and colour | White coloured, pasty consistency |
| Over coating time | 3 hours |
| Shore A Hardness | 55 |
| Tensile strength at break | 1.5 N/mm2 |
| Elongation at break | 100% |
- Elastomeric acrylic polymer based solar refl ective
- and insulating coating
- Uses
- Brushbond TI Flexicoat is designed for use as a thermal insulation
- coating on roof slabs and walls of buildings. It can also
- be used on the interior walls and the roof of freezer rooms and
- cold storage facilities.
- Application Areas include:
- ๏ฎ๏ Concrete or metal roofs
- ๏ฎ Asbestos sheet and other metal surfaces
- ๏ฎ External and internal walls
- ๏ฎ Cold storage facilities
- ๏ฎ Steam pipes and fi ttings
- ๏ฎ Wood, tiles, PU foams and asphalt shingles.
- Advantages
- ๏ฎ Minimum surface preparation needed
- ๏ฎ Single component - Brush or roller applied directly on the
- substrate
- ๏ฎ Light weight yet eff ective
- ๏ฎ Excellent adhesion to most building substrates
- ๏ฎ Excellent fl exibility at both high and low temperatures
- ๏ฎ Non conductive property saves air conditioning energy cost
- ๏ฎ Has resistance to water penetration
- ๏ฎ Flexible - high elongation characteristics
- ๏ฎ Good resistance to atmospheric pollution
- ๏ฎ Durable - High UV resistance
- ๏ฎ Breathable - allows water vapour to escape
- Description
- Brushbond TI Flexicoat is a water-based white coloured emulsion
- comprising of acrylic polymers and specially designed
- hollow “microspheres”, less than 100 microns in diameter with
- non conductive properties.
- These microspheres collectively acts as thermal insulation
- blanket covering the structure eff ectively refl ecting solar radiation
- back into the atmosphere. This results in impressive
- temperature reduction behind the substrate by a min. of 10oC.
- This system also has certain waterproofi ng properties and is
- able to bridge hairline cracks caused by thermal movements.
- Technical support
- The company provides a technical advisory service supported
- by a team of specialists in the fi eld.
Yes! I am InterestedRequest A Callback
20 L Dr Fixit 304 Powercrete Waterproofing Chemical
Product Price: Rs 2,800 / KgGet Best Price
Minimum Order Quantity: 10 Kg
Product Brochure
Product Details:
| Packaging Size | 20 Ltr |
| Grade Standard | Chemical Grade |
| Color | Milky White |
| No. Of Components | Single Component |
| Brand | Dr. Fixit |
| Usage/Application | Waterproofing |
| Packaging Type | Bucket |
| Form | Liquid |
| Coverage | 1.6 m2 /kg Two coat ( With Glass Wool Fibre ) |
| Shelf Life | 18 Months |
| Application Method | Brush |
| Product Code | 304 |
- A tough, hard wearing, breathable waterproofing system for residential, industrial, housing and commercial buildings.
- Can be applied in uniform thickness to horizontal and vertical surfaces.
- Excellent bond to most building materials.
- Reduces or prevents salt penetration into concrete.
- Suitable for exterior coating.
- Highly durable for terrace & wet area application.
- Provides tough, flexible, hard wearing surface for waterproofing.
- Is non-flammable and does not give off toxic gases, when exposed to fire.
Yes! I am InterestedRequest A Callback
Dr Fixit 112 Pidifin 2k Waterproofing Chemical
Product Price: Rs 175 / KgGet Best Price
Product Details:
| Usage/Application | Waterproofing |
| Category | Waterproofing Coating |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Packaging Size | 15 kg |
Yes! I am InterestedRequest A Callback
Dr Fixit 302 Super Latex Waterproofing Chemical
Product Price: Rs 1,200 / KgGet Best Price
Minimum Order Quantity: 20 Kg
Product Brochure
Product Details:
| Packaging Size | 5 Kg |
| Coverage | 80 Sq.ft Per Kg/ In 2 Coats |
| Type | Styrene Butadiene Latex |
| Color | Milky White |
| Form of Chemical | Liquid |
| Usage/Application | Waterproofing |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Ph Value | 10 |
| Packaging Type | Bottle |
| Appearance | Free Flowing Liquid |
| Specific Gravity @30 DegreeC. gms / ml | 1.05 |
| Non Volatile matter, % | 44 |
| Bond strength, N/sq mm | 5 |
| Chemical resistance | Resists Mild Acids & Alkalies |
| Freeze thaw resistance | Excellent |
| Product Code | 302 |
- Multipurpose – It is multipurpose & economical product, easy to use
- Cracking – It prevents cracking by improving flexural strength } Hardness – Improves the hardness & prevents dust generation
- Shrinkage – Reduces drying & ageing shrinkage cracks
- Bonding – Bonds strongly to concrete, masonry, stone work, plasters, steel & most of the building materials.
- Erosion & corrosion – Improvers erosion resistance & prevents corrosion.
- Abrasion resistance – Improves abrasion resistance of cement mix.
- Waterproofing - Prevents leakage & dampness.
- Durability - Enhances the strength of a repair mortar & provides durability.
- Rebound loss - Less material wastage- material does not fall back/ rebound, when used as bonding agent.
- Coverage - Excellent Coverage -70-80 sq.ft per kg/ in 2 coats, hence economical.
Yes! I am InterestedRequest A Callback
Dr Fixit 641 Raincoat Classic Waterproofing Chemical
Product Price: Rs 6,700 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Usage/Application | Waterproof Painting |
| Packaging Size | 20 L |
| Category | Waterproofing Coating |
| Coverage | 7 Sq Meter Single Coat Per Litre |
| Type | Acrylic Emulsion |
| Color | White |
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Packaging Type | Bucket |
| Tensile strength, Mpa | 2.50 |
| Crack bridging Ability | Class A4 |
| Positive Hydrostatic Pressure | 7 Bar |
| Total Thickness | 190 Microns |
| Product Code | 641 |
- Description Dr. Fixit Raincoat Classic system is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms high film thickness. It has excellent flexibility, breathability, water resistance, crack-bridging, weathering durability and an excellent resistance to the growth of micro organisms. Specification Confirms to SS 500:2015 Singapore waterproofing standard Typical Applications } All types of exterior masonry surfaces, concrete, cement sand renderings, existing coating etc. } Applicable on cement sheets. Features } Resists wind - driven rain, helps prevent water penetration into the substrate. } Anti-carbonation - Effective carbon dioxide diffusion barrier protects embedded steel from corrosion } Waterproofing – Higher film thickness provides crack bridging ability, waterproofing properties } Flexibility – Flexible and covers hairline cracks(up to 2 mm) effectively, thus prevents ingress of water. } Toughness – Tough film withstands wind driven rain. } Elastomeric – High elasticity easily withstands stress caused by thermal expansion & contraction } Ready to use – No dilution is required } Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value. } UV resistant – provides excellent color retention for a long lasting attractive finish } Low dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics. } Ease of application – User friendly, easily applicable by brush, roller or spray. Packaging 1, 4, 10 & 20 litre Method of Application 1 Surface Preparation } Surface must be thoroughly cleaned, free of dust, grease etc and washed well with water. Treat any areas affected by Algae, moss or fungal growth with biocide wash solution. The surface to be checked for cracks, hollowness and loose plastered areas etc if any. All loose plaster and cracks larger than 10 mm width to be repaired with polymer modified mortar using Dr. Fixit Pidicrete URP. The cracks up to 5 mm to be treated with Dr. Fixit Crack-X Paste and the larger ones up to 10 mm with Dr. Fixit Crack-X Shrinkfree. 2 Priming } After the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water (2 parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs. 3 COATING } Brush apply one coats of Dr. Fixit Raincoat Waterproof Coating without any dilution Maintain the spreading rate of 3.5-4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. The second coat of Dr. Fixit Raincoat Classic Topcoat to be apply with interval of 6-8 hours without any dilution. Maintain the spreading rate of 7-8 sq mtr per litre / coat application to achieve about 50-60 microns DFT. 641 Dr. Fixit Raincoat Classic Dr. Fixit Raincoat Classic H i g h B ui l d D urab l e exteri o r e l ast o m eric waterpr o o f c o atin g 641 Raincoat Classic 30/3/18 Coatings & Paints 144 2. Dr. Fixit Raincoat classic FOR REPAINTED SURFACES: Surface preparation for painted surface: Existing substrates must be cleaned to remove all dirt, mildew and other contaminants. Treat any areas affected by Algae,moss or fungal growth with biocide wash solution. This is accomplished by pressure-cleaning equipment with a minimum capability of 100-140 bar water pressure. .
Yes! I am InterestedRequest A Callback
Dr Fixit 651 Raincoat Neo External Wall Waterproofing
Product Price: Rs 4,000 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Usage/Application | Waterproofing |
| Packaging Size | 20 L |
| Category | Waterproofing Coating |
| Color | White |
| Coverage | Vertical Surface 4.1m2/ltr |
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Type | Acrylate Copolymer |
| Purity | 100% |
| Shelf Life | 24 Months |
| Packaging Type | Bucket |
| Film Appearance | Smooth & Uniform |
| Elongation (%) | 125 |
| Tensile Strength ,MPa | 1.5 |
| Coating thickness microns (Self priming + 1 coat) | 110 |
| Product Coade | 651 |
- Waterproofing – 100% elastomeric coating with double thickness than ordinary paint - backed by 3 year waterproofing warranty
- UV protection - Provides complete weather protection from heat and rain.
- Anti-algal resistance - Keep your walls fresh for longer time.
- Crack bridging – Elastic film covers hair line cracks upto 0.5 mm
- Long term protection - Backed by 5 year performance warranty.
- Color Variants – Tintable; available in 1000+ shades
- Self-priming system – no separate primer needed
- Dr. Fixit Raincoat Neo is high build Acrylate Copolymers -based elastomeric exterior wall, waterproof coating. Designed with weather resistant acrylate polymers. It is UV resistant and offers good hiding and spreading. Dr. Fixit Raincoat Neo develops a strong inter-coat adhesion with the substrate therefore no separate primer is required. The coating doesn’t peel off from the wall and flake, hence the walls, look beautiful for longer periods. Areas of Application } Plastered vertical wall surface } Already painted wall Features & Benefits } Waterproofing - More durability and a thicker coat than ordinary exterior paint. } UV protection - Provides complete weather protection from heat and rain. } Anti-algal resistance - Keep your walls fresh for longer time. } Crack bridging – Elastic film covers hair line cracks, } Long term protection - Backed by 5 year performance warranty. } Color Variants – Tintable; available in wide range of colour variants.
Yes! I am InterestedRequest A Callback
Dr Fixit 643 Raincoat Waterproof Coating
Product Price: Rs 4,700 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Usage/Application | Waterproof Coating For External Walls |
| Packaging Size | 20 L |
| Category | Waterproofing Coating |
| Color | White |
| Coverage | 4.0sq.m/L |
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Type | Waterproof Coating |
| Shelf Life | 36 Months |
| Packaging Type | Bucket |
| Tensile Strength | 2 N/mm2 |
| Product Code | 643 |
| Adhesion Strength | Min 1 N/mm2 |
| Coating Thickness | 150micron |
- Description Dr. Fixit Raincoat Waterproof Coating is composed of high quality emulsion polymer, weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings. Typical Applications } All types of exterior masonry surfaces, concrete, cement sand renderings, etc. } Applicable on cement sheets. Features } Flexible covers hairline cracks (up to 0.5 mm) effectively, thus prevents ingress of water. } Toughness – Tough film withstands wind driven rain. } Ready to use – No dilution is required. } Breathability – Permeable to water vapour. } Ease of application – User friendly, easily applicable by brush, roller or spray. } Non toxic – Eco Friendly. } Primer – Can act as a primer cum waterproofing coating for all water based exterior paints. } Can be tinted with universal tinter to get pastel shades Packaging 1, 4, 10 & 20 ltr Method of Application 1 Surface Preparation } All new cement-sand renderings /concrete surfaces should be allowed to age minimum 28 days before surface coating. Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by mechanical means such as wire brushing. Treat any areas affected by Algae,moss or fungal growth with biocide wash solution. All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X. Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Pidicrete URP modified mortar or as specified. 2 Priming } After the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water (2 parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs. 3 Application } Use Dr. Fixit Raincoat Waterproof Coating directly from the container. Stir contents well before use. } Apply one coats of Dr. Fixit Raincoat Waterproof Coating without dilution by brush or roller for rain lashing walls at the thickness of 120 – 130 microns. 2. Dr. FIXIT RAINCOAT WATERPROOF COATING 1. Surface preparation for previously painted surfaces: } Existing substrates must be cleaned to remove all dirt, mildew and other contaminants. Treat any areas affected by Algae, moss or fungal growth with biocide wash solution. This is accomplished by pressurecleaning equipment with a minimum capability of 100-140 bar water pressure. All grease, oils and asphalt materials must be removed completely. 643 Dr. Fixit Raincoat Waterproof Coating Dr. Fixit Raincoat Waterproof Coating UNI V ERSA L El ast o m eric EXTERI O R WATERPR OO F C O ATIN G 643 Raincoat WF Coating 13/2/18 141 Coatings & Paints } In repainting Dr. Fixit Primeseal can be eliminated based on existing paint condition. 2. Repainting application } The performance of Raincoat Waterproof Coating will depend upon the condition of the existing paint. If the existing paint film is flaking or has a weak bonding with the substrate then the subsequent coat of Raincoat Waterproof Coating will face the adhesion problem. } For a repainting work apply one coats of Dr. Fixit Raincoat Waterproof Coating without any dilution maintain the spreading rate of 3.5 -4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. After the coat dries apply 1 to 2 coats of any water based exterior paint over the Raincoat waterproof coating. Precautions & Limitations } Do not dilute. } ‘In case of fresh painting’ Recommended to be primed with Dr. Fixit Primeseal }
Yes! I am InterestedRequest A Callback
Dr. Fixit Samshield Xl
Product Price: Rs 450 / BottleGet Best Price
Product Details:
| Brand | Dr Fixit |
| Category | Bitumen Membrane |
| Color | Blue |
| Usage/Application | Self adhesive Waterproofing membrane |
| Surface Of Application | Retaining walls and roof |
Yes! I am InterestedRequest A Callback
50 Kg Dr Fixit 301 Waterproofing Chemical
Product Price: Rs 8,130 / BucketGet Best Price
Minimum Order Quantity: 4 Bucket
Product Brochure
Product Details:
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Category | Cementitious Waterproofing |
| Coverage | 2.2 M2/kg In 2 Coats As A Waterproofing Coating |
| Type | Sbr Latex For Waterproofing |
| Color | Milky White |
| Usage/Application | Waterproofing |
| Packaging Size | 50 Kg |
| Purity | 100% |
| Packaging Type | Drum |
| Product Code | 301 |
- Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. Standard Compliance / specification Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards Typical Applications } For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc. } For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies. } As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering. } For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding. } As external rendering – Weatherproof & frost resistant render. } As bonding slurry coat for pinhole treatment on concrete surface. Features } Multipurpose – It is multipurpose & economical product, easy to use. } Cracking – It prevents cracking by improving flexural strength. } Hardness – Improves the hardness & prevents dust generation. } Shrinkage – Reduces drying & aging shrinkage cracks. } Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces. } Erosion & corrosion – Improves erosion resistance & prevents corrosion. } Abrasion resistance – Improves abrasion resistance of the cement mix. } Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding. Packaging 0.2 kg, 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg & 50 kg Method of Application 1 SURFACE PREPARATION } Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents. } Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid featheredging & to provide strong bond. } Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting. } For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. 2 WATERPROOFING COATING } For a waterproofing coating Mix URP: Cement in the ratio 1:1.5 by volume. } Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding cement to Dr. Fixit Pidicrete URP until the required consistency is achieved. SBR L ate x for waterproofing & repairs Dr. Fixit Pidicrete URP 301-16/06/16 Building Repai rs 164 301 Dr. Fixit Pidicrete URP } Brush apply 2 coats of the mix in a span of 4-6 hours on the prepared concrete substrate. } Overlay the coating with a protective screed to the desired slope & thickness. 3 BONDING PRIMER } For a bonding primer coat of Dr. Fixit Pidicrete URP mix URP: Cement in the ratio 1:1 by volume. } Brush apply 1 continuous coat of the mix on the prepared concrete substrate. } Ensure to overlay the repair mortar when the bond coat is still tacky. 4 REPAIR MORTARS & RENDERS } A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 150 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 5 FLOOR SCREEDS & PCC A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 75 kg, 6 mm downsize aggregates: 75 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 6
Yes! I am InterestedRequest A Callback
Dr Fixit 301 Pidicrete Urp
Product Price: Rs 35,190 / BucketGet Best Price
Product Details:
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Color | White Crystal |
| Packaging Size | 225kg |
Yes! I am InterestedRequest A Callback
1 Kg Dr Fixit 301 Pidicrete Urp Chemical
Product Price: Rs 250 / LitreGet Best Price
Minimum Order Quantity: 50 Litre
Product Brochure
Product Details:
| Type | Sbr Latex For Waterproofing |
| Usage/Application | Waterproofing |
| Category | Cementitious Waterproofing |
| Coverage | 2.2 M2/kg In 2 Coats As A Waterproofing Coating |
| Color | White |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Purity | 100% |
| Packaging Type | Bottle |
| Product Code | 301 |
- Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. Standard Compliance / specification Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards Typical Applications } For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc. } For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies. } As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering. } For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding. } As external rendering – Weatherproof & frost resistant render. } As bonding slurry coat for pinhole treatment on concrete surface. Features } Multipurpose – It is multipurpose & economical product, easy to use. } Cracking – It prevents cracking by improving flexural strength. } Hardness – Improves the hardness & prevents dust generation. } Shrinkage – Reduces drying & aging shrinkage cracks. } Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces. } Erosion & corrosion – Improves erosion resistance & prevents corrosion. } Abrasion resistance – Improves abrasion resistance of the cement mix. } Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding. Packaging 0.2 kg, 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg & 50 kg Method of Application 1 SURFACE PREPARATION } Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents. } Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid featheredging & to provide strong bond. } Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting. } For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. 2 WATERPROOFING COATING } For a waterproofing coating Mix URP: Cement in the ratio 1:1.5 by volume. } Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding cement to Dr. Fixit Pidicrete URP until the required consistency is achieved. SBR L ate x for waterproofing & repairs Dr. Fixit Pidicrete URP 301-16/06/16 Building Repai rs 164 301 Dr. Fixit Pidicrete URP } Brush apply 2 coats of the mix in a span of 4-6 hours on the prepared concrete substrate. } Overlay the coating with a protective screed to the desired slope & thickness. 3 BONDING PRIMER } For a bonding primer coat of Dr. Fixit Pidicrete URP mix URP: Cement in the ratio 1:1 by volume. } Brush apply 1 continuous coat of the mix on the prepared concrete substrate. } Ensure to overlay the repair mortar when the bond coat is still tacky. 4 REPAIR MORTARS & RENDERS } A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 150 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 5 FLOOR SCREEDS & PCC A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 75 kg, 6 mm downsize aggregates: 75 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 6
Yes! I am InterestedRequest A Callback
Dr Fixit 303 Pidicrete MPB Waterproofing Chemical
Product Price: Rs 241 / LitreGet Best Price
Minimum Order Quantity: 40 Litre
Product Brochure
Product Details:
| Packaging Size | 1 Kg |
| Usage/Application | Water Proofing |
| Category | Waterproofing Coating |
| Coverage | 7m2/litre |
| Color | Milky White |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Purity | 100% |
| Shelf Life | 12 Months |
| Packaging Type | Bottle |
| Product Code | 303 |
- Chloride content - Contains no chloride.
- User-friendly - Single component ready to use, simply brushed onto concrete as a primer.
- Bonding - Provides excellent bond to concrete, masonry, stonework, plywood, gypsum & plaster. Strength - Improves tensile, flexural and compressive strength as compared to control concrete hence increases the durability of structures.
- Compatibility - Compatible with all common cement hence it is versatile.
- Dust generation - Excellent as a dust proof sealer
- Waterproofing - Improves waterproofing properties when admixed with cement.
- Flexibility - Improves flexural strength of cementitious composition.
Yes! I am InterestedRequest A Callback
Fosroc Decofill
Product Price: Rs 430 / PieceGet Best Price
Product Brochure
Product Details:
| Form of Chemical | Paste |
| Brand | Fosroc |
| Type | Fast setting fl exible acrylic sealant |
| Usage/Application | Replacement window installations |
| Skinning time | -45 minutes dependent on thickness, ambient temperature and humidity |
| Cure rate | 5 days depending on thickness, ambient temperature and humidity |
| Water immersion | Will resist water when cured but not suitable for immersed joints |
- Fast setting fl exible acrylic sealant Uses ๏ฎ Wall / ceiling angles, cornices ๏ฎ Door and window frame surrounds ๏ฎ Fitted furniture ๏ฎ๏ Skirtings ๏ฎ Staircases ๏ฎ Replacement window installations Advantages ๏ฎ Easy to apply and fi nish ๏ฎ Excellent adhesion to most building materials ๏ฎ Fast setting ๏ฎ Non-staining ๏ฎ Flexible seal ๏ฎ Can be over painted or papered Description Decofi ll acrylic sealant is a white acrylic based gap fi ller in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper fi nishes. Typical uses for Decofi ll acrylic sealant are gaps between skirtings, window and door frames, fitted furniture units and ceiling cornices and adjacent plaster work. Where replacement windows are installed Decofi ll acrylic sealant can be used to make good between new frames and interior plaster work. Design criteria Joint size Decofi ll acrylic sealant is primarily applied as a triangular fi llet into angles. Gaps up to 25mm wide can be fi lled using Decofi ll acrylic sealant without slumping although the larger volume of compound will take longer to set and will give some shrinkage on setting, forming a concave surface. Properties Form : Paste Solids content : 85% Density at 270C : 1.70 kg/litre Colour : White Decofi ll Physical or chemical change : Curing by loss of water Application temp. : 50C-400C Skinning time : 15-45 minutes dependent on thickness, ambient temperature and humidity. Cure rate : 3-5 days depending on thickness, ambient temperature and humidity. Water immersion : Will resist water when cured but not suitable for immersed joints Typical hardness Shore ‘A’ : 30 MA F : ±10% Specifi cation clause The flexible filler for interior gaps and cracks, shall be Decofi ll acrylic sealant, which shall exhibit excellent adhesion to most building materials and compatible for application over walls/ceiling cornices, door and window frame surrounds, fi tted furniture, skirtings, staircase, etc., easily applied and finished. It shall be fast setting, nonstaining, and form a flexible seal, which can be over painted or papered just after 8 hours at 300C. Cured Decofill acrylic sealant shall have a Shore ‘A’ hardness of about 30, and resist water. It shall fully cure by loss of water. It shall have a solids content minimum of 80% and maximum density of about 1.7 kg/litre at 25 0C and shall be easily applied with the help of a sealant gun.
Yes! I am InterestedRequest A Callback
Dr Fixit 653 Roof Seal Select Waterproofing Chemical
Product Price: Rs 4,900 / LitreGet Best Price
Minimum Order Quantity: 10 Litre
Product Brochure
Product Details:
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Coverage | 2m2 Per Litre Per Coat |
| Color | White |
| Usage/Application | Waterproofing |
| Packaging Size | 20 L |
| Type | Heavy Duty Terrace Waterproof Coating |
| Purity | 100% |
| Packaging Type | Bucket |
| Solid Content, % | Min 65 % |
| Hardness (Shore A) | 80 |
| Tensile Strength, N/mm2 | 12 |
| Elongation at Break, % | Min 100 % |
| UV Resistant - Accelerated | Excellent: No thermal degradation |
| Weathering (1000 hours) | No Cracking, Chalking And Discoloration |
| Water Vapour Transmission | 50 g/m2 /day |
| Algae & Fungus Resistant | No Algae & Fungus Growth |
| Product Code | 653 |
- Heavy duty terrace waterproof coating system
- 10 Years waterproofing warranty
- Acrylate-Silicon based technology
- 1 mm film thickness
- Tough durable elastic membrane with > 300% elongation
- Surface temperature reduction upto 10ºC
- Available in White, Grey & Terracotta Colors
Yes! I am InterestedRequest A Callback
Dr Fixit 207 Pidicrete AM Admixture Waterproofing Chemical
Product Price: Rs 35Get Best Price
Product Brochure
Product Details:
| Type | AM Admixture |
| Usage/Application | Waterproofing |
| Category | Waterproofing Admixture |
| Coverage | 50 Kg Cement And 225 G Dr. Fixit Pidicrete AM Will Give 34 L Yield |
| Color | Grey |
| Form of Chemical | Powder |
| Brand | Dr Fixit |
| Shelf Life | 12 Months |
| Packaging Type | Packet |
| Pack Size | 225gm |
| Product Code | 207 |
-
Dr. Fixit Pidicrete AM is composed of plastisizers, expansion additives, polymers & defoamer. It is used for producing cementitious injection grouts for pressure / gravity injection into concrete structures, for producing cementitious grouts, which are suitable for bed grouting, duct grouting, filling etc. because it provides plastisizing action which improves flow, expansion additive provides shrinkage compensation after curing & high compressive strength. Specification Pidicrete AM meets the requirement of ASTM C 109: 99, ASTM C 307, BS 1881 Part 207
Areas of Application:-
For injection grouting in
RCC slabs, Sunken slabs
RCC walls of water tanks, swimming pools
Basements for waterproofing purpose
Duct grouting
Rock and soil anchoring
Pre-placed aggregates and tunnel lining
Crack filling in structural cracks
For structural strengthening in repairs
Yes! I am InterestedRequest A Callback
20L Dr Fixit 101 Pidiproof LW Plus
Product Price: Rs 320 / LitreGet Best Price
Minimum Order Quantity: 50 Litre
Product Brochure
Product Details:
| Packaging Size | 20 L |
| Form of Chemical | Liquid |
| Usage/Application | Waterproofing |
| Brand | Dr Fixit |
| Category | Integral Waterproofing |
| Color | Red |
| Shelf Life | 2 Years From The Date Manufacture When In Sealed Pack And Stored Under Proper Condition |
| Packaging Type | Bucket |
| Sp. gr. @ 250C | 1.09 |
| Non Volatile Content | 14.5 % |
| Chloride Content | 0.03% |
| Dosage | 200 Ml Per 50 Kg Bag Of Cement |
| Product Code | 101 |
- Waterproofs concrete during the construction stage.
- Improves workability.
- Avoids cracking.
- Protect concrete from corrosion.
- LW+ should be used in concrete, plaster and mortar in all the areas of house.
- Mix 200 ml of LW+ with every 50 kg bag of cement.
Yes! I am InterestedRequest A Callback
500g Dr Fixit 301 Pidicrete Urp Chemical
Product Price: Rs 150 / LitreGet Best Price
Minimum Order Quantity: 50 Litre
Product Details:
| Type | Sbr Latex For Waterproofing |
| Usage/Application | Waterproofing |
| Category | Waterproofing Coating |
| Coverage | 2.2 m2/kg In 2 Coats |
| Color | White |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Purity | 100% |
| Packaging Type | Bottle |
| Product Code | 301 |
- Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. Standard Compliance / specification Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards Typical Applications } For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc. } For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies. } As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering. } For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding. } As external rendering – Weatherproof & frost resistant render. } As bonding slurry coat for pinhole treatment on concrete surface. Features } Multipurpose – It is multipurpose & economical product, easy to use. } Cracking – It prevents cracking by improving flexural strength. } Hardness – Improves the hardness & prevents dust generation. } Shrinkage – Reduces drying & aging shrinkage cracks. } Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces. } Erosion & corrosion – Improves erosion resistance & prevents corrosion. } Abrasion resistance – Improves abrasion resistance of the cement mix. } Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding. Packaging 0.2 kg, 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg & 50 kg Method of Application 1 SURFACE PREPARATION } Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents. } Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid featheredging & to provide strong bond. } Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting. } For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. 2 WATERPROOFING COATING } For a waterproofing coating Mix URP: Cement in the ratio 1:1.5 by volume. } Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding cement to Dr. Fixit Pidicrete URP until the required consistency is achieved. SBR L ate x for waterproofing & repairs Dr. Fixit Pidicrete URP 301-16/06/16 Building Repai rs 164 301 Dr. Fixit Pidicrete URP } Brush apply 2 coats of the mix in a span of 4-6 hours on the prepared concrete substrate. } Overlay the coating with a protective screed to the desired slope & thickness. 3 BONDING PRIMER } For a bonding primer coat of Dr. Fixit Pidicrete URP mix URP: Cement in the ratio 1:1 by volume. } Brush apply 1 continuous coat of the mix on the prepared concrete substrate. } Ensure to overlay the repair mortar when the bond coat is still tacky. 4 REPAIR MORTARS & RENDERS } A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 150 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 5 FLOOR SCREEDS & PCC A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 75 kg, 6 mm downsize aggregates: 75 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 6
Yes! I am InterestedRequest A Callback
Dr Fixit 112 Pidifin 2k Waterproofing Chemical
Product Price: Rs 370 / KgGet Best Price
Product Details:
| Category | Waterproofing Coating |
| Color | White Crystal |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Purity | 100% |
Yes! I am InterestedRequest A Callback
Thioflex 600 GP
Product Price: Rs 250 / KgGet Best Price
Product Brochure
Product Details:
| Brand | Forsoc |
| Packaging Type | Bucket |
| Application Industry | Joint filling |
| Form | Multi-part, paste compound |
| Grade Standard | Chemical |
| Strength | High |
| Density | 1.62 kg/litre |
| Colours | Gun grade: grey Pouring grade: grey |
| Movement accommodation | 25% butt joints 50% lap joints |
| Pot life | 2 hours @ 25 DegreeC |
| Solids content | 100% |
- Multi-component, gun and pouring grade, polysulfide sealant Uses Sealing movement joints in building and civil engineering structures, including superstructures, floors, basements and subways. Advantages ๏ฎ Meets key international standards ๏ฎ Forms a tough, elastic, rubber-like seal ๏ฎ Accommodates continuous and pronounced cyclic movement ๏ฎ Excellent adhesion to most common substrates, including primed concrete, glass, aluminium and stainless steel ๏ฎ High resistance to ageing reduces physical damage due to climatic extremes Description Thioflex 600 is available in gun and pouring grades. The gun grade is ideal for general application. It is packed in a ready to mix, 2.5 litre tin containing the base and curing agent in the correct proportions. The pouring grade for joints in horizontal surfaces is supplied in 5 litre packs with the base and curing agent in separate tins. Thioflex 600 is particularly recommended for use in high-rise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimised. It is also suitable for sealing joints in brickwork, retaining walls, basements and subways. Thioflex 600 pouring grade is recommended for initial sealing of expansion joints and stress relief joints in floors and sealing other horizontal surfaces. Design criteria Thioflex 600 may be applied to joints between 5 and 50 mm wide. Joints which are expected to experience cyclic movements should be designed to an optimum width : depth ratio of 2:1, subject to the overriding recommended minimum sealant depths set out below: 5 mm for metals, glass and other non-porous surfaces; 10 mm for all porous surfaces; 20 mm for trafficked joints and those subject to hydrostatic pressures. To ensure that the sealant remains within its stated movement capacity (25% MAF), sealing slot widths should be designed in accordance with the recommendations of BS 6093. The use of a surface primer is always required on porous surfaces. On non-porous surfaces a primer is not normally required except where glass or glazed surfaces are to be permanently immersed in water.
Yes! I am InterestedRequest A Callback
Fosroc Reebol Emulsion
Product Price: Rs 1,150 / BottleGet Best Price
Product Brochure
Product Details:
| Brand | Fosroc |
| Packaging Size | 20 L |
| Coverage | 60 m2 per litre |
| Physical State | Liquid |
| Type | Chemical mould release agent |
| Usage/Application | For quick, clean and easy stripping of moulds and formwork |
| Shelf Life | 12 Months |
| Specific Gravity | Typically 0.83 at 20oC. |
- For quick, clean and easy stripping of moulds and formwork.
- โ For high quality, fair-faced and stain-free concrete.
- Advantages
- โ Ensure easy release, reducing damage and improving efficiency of production.
- โ Minimises surface blemishes and staining, promoting high quality fair-faced concrete even with white cement.
- โ Reduces opportunity of damage to formwork, extending usable life.
- โ Minimises cleaning of formwork before re-use.
- โ Suitable for use with virtually all types of formwork.
- โ Inhibits corrosion of steel formwork.
- Standards compliance
- Category 5: Chemical release agent (Concrete Society: Notes on formwork lease agents and coatings. April 1981).
- Description
- Reebol chemical mould release agent is a specifically formulated blend of mineral oils and selected additives. It is supplied as a low viscosity, pale straw coloured liquid.
- On the mould, Reebol provides a chemical release action that is superior to that provided by normal oil based release agents (Concrete Society Categories 1 to 4). Entrapment of air bubbles at the mould surface is minimised, reducing surface blemishes and substantially reducing remedial costs.
- As well as improving cast concrete surfaces, Reebol also minimises damage to form surfaces. Corrosion on steel moulds is reduced. On all mould types the easier release and reduced residue minimise the chance of damage to the mould surface during stripping and cleaning. This extends the life of the surface and reduces the frequency of concrete defects caused by damage to the mould face.
- Technical support
- Fosroc provides a technical advisory service for on-site assistance and advice on admixture selection, evaluation trials and dispensing equipment. Technical data and guidance can be provided for admixtures and other products for use with fresh and hardened concrete.
- Properties
- Specific gravity: Typically 0.83 at 20oC.
- Reebol is designed for use on surfaces sealed with Reebol Formcote and is suitable for use on timber, both plain and polyurethane coated, steel, GRP and other resinous formwork surfaces.
- Instructions for use
- Mould preparation
- All moulds, new or used, must be cleaned of surface deposits of rust, concrete, oil or other materials. Inadequate cleaning may lead to surface blemishes due to the adhering material. The use of Fosroc’s Acid Etch and Chemical Degreaser will assist the cleaning process.
- If only limited use of the formwork is envisaged, new timber moulds may be coated directly with Reebol. If forms are to be regularly re-used then the surface should initially be coated with a suitable polyurethane sealer. This provides increased protection to the timber surface, improves ease of cleaning and prevents the build up of large residual levels of release agent in the timber of the form which may lead, over time, to increased surface dusting or retardation..
- Application
- Reebol can be applied by all normal methods, including brush, sponge and conventional spray. Where suitable, spray application is recommended.
- Non-absorbent surfaces require a single application. New, unsealed, timber surfaces should be re-coated if delay in use of the mould leads to absorption of the release agent in to the timber.
- Coverage rate
- Depending on the porosity and texture of the mould surface, typical coverage rates of 20 to 60 m2 per litre (0.015 to 0.050 litres per m2) will be obtainable.
Yes! I am InterestedRequest A Callback
Dr Fixit 105 Waterproof Powder
Product Price: Rs 140 / KgGet Best Price
Minimum Order Quantity: 100 Kg
Product Brochure
Product Details:
| Category | Cementitious Waterproofing |
| Color | White |
| Coverage | 500gm Of Dr. Fixit Powder Waterproof For 50 kg Bag Of Cement |
| Form of Chemical | Powder |
| Brand | Dr Fixit |
| Usage/Application | Waterproofing |
| Type | Waterproofing Additives |
| Packaging Type | Packet |
| Packing | 500gm |
| Appearance | Free Flowing Powder |
| Compressive strength, N/MM2 | Matches To Control Mix |
| Water permeability | 50% Of Control Mix |
| Setting time @ 30 DegreeC, mins | Passes |
| Product Code | 105 |
Yes! I am InterestedRequest A Callback
Dr Fixit 112 Pidifin 2k Waterproof Coating
Product Price: Rs 2,550 / KgGet Best Price
Minimum Order Quantity: 20 Kg
Product Brochure
Product Details:
| Usage/Application | Waterproofing |
| Category | Cementitious Waterproofing |
| Coverage | 52 m2 |
| Color | Milky White |
| Form of Chemical | Liquid |
| Packaging Size | 30 Kg |
| Brand | Dr Fixit |
| Shelf Life | 12 Months |
| Packaging Type | Bucket |
| Product Code | 112 |
| Adhesion Strength | 1.0 N/mm2 |
- Acrylic Cementitious Two Component Waterproof Coating
- Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified flexible, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates. Typical Application } Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc. } Ideal as a coating for waterproofing of roofs, chhajjas, canopies, etc. } As waterproof coating on internal sides of domestic water tanks. } Can be applied over internal damp walls and concrete surfaces due to its excellent bonding. Features } Flexible coating } This product can be used for both positive and negative side waterproofing due to its excellent bonding } Excellent adhesion to concrete and masonry surfaces } Excellent resistance to ingress of water } Confirms to portable water contact parameters. } Non-toxic with low VOC content Packaging 3 kg, 9 kg, 15 kg, 30 kg & 90 kg
Yes! I am InterestedRequest A Callback
Waterproofing Fiber Mesh
Product Price: Rs 1,500 / RollGet Best Price
Product Details:
| Usage/Application | Construction |
| Pattern | Plain |
| Country of Origin | Made in India |
Yes! I am InterestedRequest A Callback
20 Kg Dr Fixit 301 Pidicrete URP Chemical
Product Price: Rs 3,740 / LitreGet Best Price
Minimum Order Quantity: 20 Litre
Product Brochure
Product Details:
| Packaging Size | 20kg |
| Type | Sbr Latex For Waterproofing |
| Usage/Application | Waterproofing |
| Category | Waterproofing Coating |
| Coverage | 2.2 M2/kg In 2 Coats As A Waterproofing Coating |
| Color | Milky White |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Packaging Type | Bucket |
| Product Code | 301 |
| Compatible Material | Concrete |
- Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. Standard Compliance / specification Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards Typical Applications } For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc. } For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies. } As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering. } For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding. } As external rendering – Weatherproof & frost resistant render. } As bonding slurry coat for pinhole treatment on concrete surface. Features } Multipurpose – It is multipurpose & economical product, easy to use. } Cracking – It prevents cracking by improving flexural strength. } Hardness – Improves the hardness & prevents dust generation. } Shrinkage – Reduces drying & aging shrinkage cracks. } Bonding – Bonds strongly to concrete, masonry, stonework, plasters, cementitious surfaces. } Erosion & corrosion – Improves erosion resistance & prevents corrosion. } Abrasion resistance – Improves abrasion resistance of the cement mix. } Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding. Packaging 0.2 kg, 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg & 50 kg Method of Application 1 SURFACE PREPARATION } Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents. } Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid featheredging & to provide strong bond. } Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting. } For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. 2 WATERPROOFING COATING } For a waterproofing coating Mix URP: Cement in the ratio 1:1.5 by volume. } Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding cement to Dr. Fixit Pidicrete URP until the required consistency is achieved. SBR L ate x for waterproofing & repairs Dr. Fixit Pidicrete URP 301-16/06/16 Building Repai rs 164 301 Dr. Fixit Pidicrete URP } Brush apply 2 coats of the mix in a span of 4-6 hours on the prepared concrete substrate. } Overlay the coating with a protective screed to the desired slope & thickness. 3 BONDING PRIMER } For a bonding primer coat of Dr. Fixit Pidicrete URP mix URP: Cement in the ratio 1:1 by volume. } Brush apply 1 continuous coat of the mix on the prepared concrete substrate. } Ensure to overlay the repair mortar when the bond coat is still tacky. 4 REPAIR MORTARS & RENDERS } A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 150 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 5 FLOOR SCREEDS & PCC A suitable mix ratio for patching repair mortar or render is as follows: } Mix design - Portland Cement: 50 kg, Washed sand: 75 kg, 6 mm downsize aggregates: 75 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit 6
Yes! I am InterestedRequest A Callback
50L Dr Fixit 304 Powercrete Waterproofing Chemical
Product Price: Rs 6,500 / KgGet Best Price
Minimum Order Quantity: 10 Kg
Product Brochure
Product Details:
| Packaging Size | 50L |
| Grade Standard | Chemical Grade |
| Color | Milky White |
| No. Of Components | Single Component |
| Brand | Dr Fixit |
| Usage/Application | Waterproofing |
| Packaging Type | Drum |
| Form | Liquid |
| Coverage | 1.6 m2 /kg Two coat ( With Glass Wool Fibre ) |
| Shelf Life | 18 Months |
| Paint Base Type | Acrylic Latex |
| Application Method | Brush |
| Product Code | 304 |
| Bond Strength | 21 Kg/cm2 |
- A tough, hard wearing, breathable waterproofing system for residential, industrial, housing and commercial buildings.
- Can be applied in uniform thickness to horizontal and vertical surfaces.
- Excellent bond to most building materials.
- Reduces or prevents salt penetration into concrete.
- Suitable for exterior coating.
- Highly durable for terrace & wet area application.
- Provides tough, flexible, hard wearing surface for waterproofing.
- Is non-flammable and does not give off toxic gases, when exposed to fire.
Yes! I am InterestedRequest A Callback
Dr Fixit Waterproofing 404 Fevimate Tg
Product Price: Rs 80 / KgGet Best Price
Product Details:
| Form of Chemical | Powder |
| Brand | Dr Fixit |
| Category | Waterproofing Coating |
| Color | White Crystal |
| Packaging Size | 500g |
Yes! I am InterestedRequest A Callback
Dr Fixit 642 Raincoat Select Waterproofing
Product Price: Rs 7,900 / BucketGet Best Price
Minimum Order Quantity: 10 Bucket
Product Brochure
Product Details:
| Usage/Application | External Wall Waterproofing |
| Packaging Size | 20 L |
| Category | Acrylic Based Polymer Coating |
| Coverage | 4.0Sq.m/L |
| Color | White |
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Thickness | 190 Micron |
| Packaging Type | Bucket |
| Tensile Strength | 2.50 MPa |
| Elongation % | 100 |
| Positive Hydrostatic Pressure | 8 Bar |
| Product Code | 642 |
- Excellent hide and color retention
- Protect your external walls
- Excellent protection from cracking, peeling and blistering
- Elastomeric coating
- 10 years* waterproofing warranty
- High sheen for enhanced aesthetics
- Dr. Fixit Raincoat Select is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms higher film thickness. It has excellent flexibility, breathability, water & dust resistance, crack-bridging, weathering durability and an excellent resistance to the growth of micro organisms. Specification Confirms to SS 500:2015 Singapore waterproofing standard Typical Application } All types of exterior masonry surfaces, concrete, cement sand renderings, existing coating etc. } Applicable on cement sheets. Features } Anti-carbonation - Effective carbon dioxide diffusion barrier protects embedded steel from corrosion } Waterproofing – Higher film thickness provides crack bridging ability, waterproofing properties } Flexibility – Flexible and covers hairline cracks (class A4) effectively, thus prevents ingress of water. } Toughness – Tough film withstands wind driven rain. } Elastomeric – High elasticity easily withstands stress caused by thermal expansion & contraction } Ready to use – No dilution is required } Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value. } UV resistant – provides excellent color retention for a long lasting attractive finish } Low dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics. } Ease of application – User friendly, easily applicable by brush, roller or spray. Packing Dr. Fixit Raincoat Waterproof Coat – 1, 4 ,10 & 20 ltr Dr. Fixit Raincoat Select (Top Coat) – 1, 4 ,10 & 20 ltr Method of Application 1 SURFACE PREPARATION New surfaces Surface must be thoroughly cleaned, free of dust, grease etc and washed well with water. Treat any areas affected by Algae, moss or fungal growth with biocide wash solution. The surface to be checked for cracks, hollowness and loose plastered areas etc if any. All loose plaster and cracks larger than 10 mm width to be repaired with polymer modified mortar using Dr. Fixit Pidicrete URP. The cracks up to 5 mm to be treated with Dr. Fixit Crack-X Paste and the larger ones up to 10 mm with Dr. Fixit Crack-X Shrinkfree. Priming After the proper surface preparation and curing of repaired areas wash the surface well and maintaining it in saturated surface dry condition proceed for priming using Dr. Fixit Primeseal diluted in 2:1 ratio with water (2 parts Primeseal diluted with 1 part water). Maintain the spreading rate of 8-10 sq mtr per litre for a single coat application to achieve about 20 – 25 microns DFT. Allow it to dry for 6-8 hrs. 642 Dr. Fixit Raincoat Select Dr. Fixit Raincoat Select H i g h performance exterior waterproof coatin g 642 Raincoat Select 19/2/18 135 Coatings & Paints Coating Brush apply one coats of Dr. Fixit Raincoat Waterproof Coating without any dilution Maintain the spreading rate of 3.5 -4.0 sq mtr per litre / coat application to achieve about 120-130 microns DFT. The second coat of Dr. Fixit Raincoat Select Topcoat to be apply with interval of 6-8 hours without any dilution. Maintain the spreading rate of 6-6.5 sq mtr per litre / coat application to achieve about 60-70 microns DFT. 2 Dr. Fixit Raincoat select FOR REPAINTED SURFACES: Surface preparation for painted surface Existing substrates must be cleaned to remove all dirt, mildew and other contaminants. Treat any areas affected by Algae, moss or fungal growth with biocide wash solution.
Yes! I am InterestedRequest A Callback
Dr Fixit W013 Plaster Master Waterproofing Chemical
Product Price: Rs 1,800 / BucketGet Best Price
Minimum Order Quantity: 40 Bucket
Product Details:
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Category | Cementitious Waterproofing |
| Color | White |
| Usage/Application | Waterproofing |
| Packaging Size | 20 L |
| Packaging Type | Bucket |
| Model No | W013 |
-
Reduces Rebound Loss While Plastering.
-
Improves Workability with All Types of Sand.
-
Reduces Shrinkage Crack Development in Plaster.
Yes! I am InterestedRequest A Callback
15 Kg Dr Fixit 112 Pidifin 2k Waterproof Coating
Product Price: Rs 1,470 / KgGet Best Price
Minimum Order Quantity: 50 Kg
Product Brochure
Product Details:
| Usage/Application | Waterproofing |
| Category | Cementitious Waterproofing |
| Color | White |
| Form of Chemical | Liquid |
| Packaging Size | 15 Kg |
| Brand | Dr Fixit |
| Shelf Life | 12 Months |
| Packaging Type | Bucket |
| Waterproofing | 112 |
| Adhesion Strength | 1.0 N/mm2 |
| Product Code | 112 |
- Acrylic Cementitious Two Component Waterproof Coating
- Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified flexible, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates. Typical Application } Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc. } Ideal as a coating for waterproofing of roofs, chhajjas, canopies, etc. } As waterproof coating on internal sides of domestic water tanks. } Can be applied over internal damp walls and concrete surfaces due to its excellent bonding. Features } Flexible coating } This product can be used for both positive and negative side waterproofing due to its excellent bonding } Excellent adhesion to concrete and masonry surfaces } Excellent resistance to ingress of water } Confirms to portable water contact parameters. } Non-toxic with low VOC content Packaging 3 kg, 9 kg, 15 kg, 30 kg & 90 kg
Yes! I am InterestedRequest A Callback
Dr Fixit 601 Raincoat Waterproof Coating
Product Price: Rs 6,500 / BucketGet Best Price
Minimum Order Quantity: 20 Bucket
Product Brochure
Product Details:
| Usage/Application | Waterproofing |
| Packaging Size | 20 L |
| Category | Acrylic Based Polymer Coating |
| Coverage | 3.5m2/L For 2 Coats |
| Color | White |
| Form of Chemical | Emulsion |
| Brand | Dr Fixit |
| Specific Gravity | 1.31 |
| Ph Value | 9.0 |
| Packaging Type | Bucket |
| Nature | Single Component |
| Elongation % | Min 100% |
| Water permeability - Depth of water penetration | 6 |
| Reduction in water penetration | 68% |
| Rapid chloride penetration test - Penetration of chloride ion | Very Low |
| Algae & fungal resistance | No Growth |
| Product Code | 601 |
- Dr. Fixit Raincoat is composed of high quality acrylic emulsion polymer, uv resistant & weather durable pigments, properly selected & graded fine fillers, additives & biocides. It is used as a waterproofing & protective coating for exterior walls of the buildings. Typical Application } All types of exterior masonry surfaces, concrete, cement sand renderings, etc. } Applicable on asbestos sheets. } As an anti carbonation coating for concrete structures Features } Flexibility - Flexible and covers hairline cracks (up to 0.5 mm) effectively, thus prevents ingress of water. } Toughness - Tough film withstands wind driven rain. } Ready to use – No dilution is required. } Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value. } UV resistant – Resistance to UV hence coating has longer life. } Low dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics. } Breathability - Permeable to water vapour. } Ease of application – User friendly, easily applicable by brush, roller or spray. } Non toxic - It is Eco friendly. Packaging White Base - 1, 4 & 20 litre. Mid Tone and Dark Base - 900 ml, 3.8 & 19 litre.
Yes! I am InterestedRequest A Callback
Dr Fixit 113 Fastflex Waterproofing Chemical
Product Price: Rs 1,600 / PieceGet Best Price
Minimum Order Quantity: 50 Piece
Product Brochure
Product Details:
| Category | Cementitious Waterproofing |
| Color | White |
| Form of Chemical | Liquid |
| Brand | Dr Fixit |
| Usage/Application | Waterproofing |
| Type | Waterproofing Chemical |
| Pack Size | 12 Kg(Liquid + Powder) |
| Product Code | 113 |
| Compatible Material | Concrete |
| Set Contains | Liquid And Powder |
- Dr. Fixit Fastflex is a two component acrylic cementitious coating system for waterproofing of wet areas and any water retaining structures such as swimming pools and water features. It provides strong bonding and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete surfaces. Areas of Application } Any concrete, cement or masonry surface that are subject to moisture ingress. } Swimming pools, water features and water tanks. } Bathrooms, toilets, balconies, planters etc. Features & Benefits } Seamless, impervious membrane. } Elastomeric. } High film build-up. } Excellent adhesion to concrete and masonry substrates. } Low VOC. } Easily applied by brush, roller or trowel. } Can be applied on damp surfaces. Method of Application 1 SURFACE PREPARATION } The surface of application must be thoroughly prepared by mechanical means, to remove all loose particles, laitance, etc. } Oil and grease, if any, must be de-greased with suitable solvents. It then must be washed off with jet of water and brought to touch dry state. } Any surface undulations, cracks and crevices must be duly filled or repaired with cement sand mortar mixed with latex polymers such as Dr. Fixit Pidicrete URP. } All vertical up-stands & junctions /corners are provided with 45° fillet with Polymer Modified Mortar (PMM), mixed with Dr. Fixit Pidicrete URP all around the periphery of the junction. } Substrate must be in a "Saturated Surface Dry" (SSD) condition (damp, without standing water) prior to application. 2 MIXING } Using a slow speed mechanical mixer and a clean suitable mixing vessel, slowly add the powder component to the liquid polymer and stir until a smooth and homogenous slurry, is achieved. } Allow the mixed slurry to stand for 5 – 10 minutes before use. } Do not dilute with water. 3 APPLICATION } All the pipe inserts or sanitary fittings should have been fitted grouted with suitable products from the Dr. Fixit range well before taking up the application. } The surface of application must be pre-wetted thoroughly with water & brought to a touch dry state. Take up the first coat application with a stiff nylon brush. Work well into the substrate, to ensure that all small undulations are completely filled with the coating. } Provide and lay 45 GSM glass fibre mesh over the angle fillet when the first coat in still wet. } 6 to 8 hrs after completion of first coat, take up second coat application in a direction perpendicular to the first. 112 Fastflex-23/02/2022 WATERPROOFING 84 113 Dr. Fixit Fastflex } Complete the application and leave to air cure for 3-5 days. A moist hessian cloth can be kept over the coated surface to protect it from the effect of direct sunlight, in case of bathrooms and internal areas, leave the coating without water curing for 3-5 days at least. } For vertical walls in bathroom ensure internal plaster is sound, levelled and mixed with Dr. Fixit Pidiproof LW+, Apply 2 coats of Dr. Fixit Fastflex on all over or shower area, sprinkle the coarse, quartz sand while the second coat is still wet or apply a spatter dash bond coat..This will provide key for subsequent tile adhesive materials. 4 WATERPROOFING OF ROOF AND WATERTANKS } General waterproofing if applied in areas exposed to foot traffic, it must be protected with a screed overlaid, during the application itself. } When coating for internal walls of water tanks, sprinkle coarse sand after second coat on wet coating to facilitate anchoring for upcoming protection plaster. 5 WATERPROOFING OF SWIMMING POOLS } Apply Dr. Fixit Fastflex in 3 coats with each coat perpendicular direction to previous applied at the 6-8 hours interval at 3Kg/M2 coverage. } Extend the coating up to the full height of internal RCC walls.
Yes! I am InterestedRequest A Callback
View More